Above Ground Pool Fence Regulations Victoria

This includes inflatable pools.

Above ground pool fence regulations victoria.

The fence must be at least 5 feet high if located on the ground or 3 feet high if located on top of the wall of an above ground pool or hot tub. For above ground pools or spas the combined height of fence and pool cannot be higher than 10 feet. The pool fence must be constructed from durable materials. Ohio residential swimming pool safety is regulated by the boca pool barrier code public swimming pools.

8 ground level doors and windows opening from occupied buildings to inside the pool enclosure shall be self closing or child protected by means of a barrier or audible alarm. All swimming pools and spas on residential properties in victoria with a depth greater than 30cm 300mm are required to be surrounded by a safety barrier e g. A new outdoor pool or spa must not have direct access from any building. The top of the fence must be a minimum of 900mm away from climbable objects including trees pergolas barbecues toys pot plants and furniture.

B public swimming pool fences constructed prior to may 1 2010 may vary from the provisions of paragraph a of this rule as follows. Any gaps in the fencing must be less than 100mm. This rule is designed to prevent swimming pools hazards. Before 8th april 1991.

Swimming pool and spa owners have a legal obligation to ensure that they maintain the effective operation of swimming pool and spa safety barriers. And ii a height not exceeding 2 13 m. Pool fencing laws and requirements. In victoria the construction and installation of swimming pools spas and safety barriers and barrier maintenance are all subject to the requirements of the building regulations 2018 the regulations.

B surrounds a park or land that is zoned for industrial or manufacturing use where i the council permits the fence on the basis of a safety report of the city s building inspector. Safety barriers must comply with as1926 1 2012. And ii the fence does not exceed a height of 3 05 m. There are currently 3 sets of requirements for pool spa barriers in victoria these are based on when your pool or spa was constructed.

Once the excavation begins and the pool structure for the pool or spa contains more than 300 mm of water a safety barrier complying with australian standards as 1926 1 2012 must be erected and maintained. Gates must be self closing and swing away from the pool. All pools and spas built after 2010 require a four sided barrier isolation fence with no direct access from the house or any other building to the pool or spa. Property owners and occupants are responsible for making sure pool barriers are maintained repaired and kept in working order.

Signed by the u s. If a victorian residential pool or spa has a depth of 30cm or more 300mm it is required to be surrounded by safety barrier. A site fence on the construction site must be in place before any excavation or installation of the swimming pool or spa begins.